
62 UG034, July 1, 2014
Appendix B – LEDs, Buttons, Jumpers, and
Switches
The following tables list the various LEDs, buttons, jumpers, and switches on the board. You
can use these for configuration, status indication, or reset.
LEDs
Table 26: LEDs and their Functions
Configuration status indicator
Configuration done indicator
Note: D2, D3, D7, D8, D5 – D12, and DS1 are connected to V3P3.
Buttons
Table 27: Push Buttons and their Functions
User Programmable FPGA
Fabric Reset
HD1000 configuration reset
* Usage of FPGA reset push-button requires a reset signal in the design to be routed to the IO
corresponding to the push button, which is pad2_clk_bank_sw = P17.
Komentáře k této Příručce