Achronix Bitporter Uživatelský manuál stáhnout pdf (Strana 22)

Connecting the Bitporter Pod Connecting the Bitporter Pod

PAGE 16

www.achronix.com Bitporter User Guide

Thewizardappearstwiceduringtheinstall:oncefortheAchronixBitporterFirm‐

wareLoaderandthenagainfortheAchronixBitporterPoddrivers.Thefirstdriver

downloadsfirmwaretotheBitporterpod;theseconddriverconnectstothepodfor

JTAGoperations.

Ifnotpromptedtoinstallthesedriversthe

firsttimetheBitporterisconnectedtoa

USBport,unplugtheUSBcable,thenrebootthehostPC.Oncethesystemhas

rebooted,plugintheUSBcableagain—atthispointdriverinstallationshouldbegin.

Note: Duringthedriverinstallation,theBitporterpod’sPOWERLEDturnsonand

the

COMMLEDmayflash.Oncedriverinstallationcompletessuccessfully,thePOWERLED

remainslit,andtheCOMMLEDturnsoff.

10. Turnonthepowertothetargethardware.

11. Continueto“VerifyingtheSetup,”onpage 18.

Linux / Windows 7

1. Turnoffthepowertothetargethardware.

2. ConnectoneendoftheJTAGflatribboncabletothetargetJTAGconnector.Thered

stripispin 1.

Note: Ifthetar getJTAGconnectorisnotkeyed,thetar get’sUserGuidewillspecifythelocation

ofpin1onthetargetJTAG

connector.

3. ConnecttheotherendoftheJTAGflatribboncabletotheBitporterpod.Theplugis

keyed.

4. ConnecttheUSBcabletothehostPC.

5. ConnecttheUSBcabletotheBitporter.

Note: Duringthepodinitialization,theBitporterpod’spowerLEDturnsonandtheCOMM

LEDmayflash.

Oncepodinitializationcompletessuccessfully,thepowerLEDremainslit,

andtheCOMMLEDturnsoff.

6. Turnonthe powertothetargethardware.

7. Continueto“VerifyingtheSetup,”onpage 18.

Connecting the Bitporter Pod via Ethernet (Windows and Linux)

TheBitporterpodsupportsEthernetconnectivitytooneormorePCs,supportingbothstatic

anddynamic(viaDHCP)IPaddressing.BeforeattemptingEthernetconnectiontoaBitporter

pod,pleaseconsultthenetworkadministratortoensurethat:

•The Bitporter pod  is allowed to connect to the necessary network. If the Bitporter

pod’sMACaddress

isneeded,see“BitporterPodMACAddresses,”onpage 36.

•IfusingdynamicIP/DHCP:verifyaDHCPservercoversthenetworksegmentonto

whichthepodwillbeattached.

•If using static IP: consult with the system administrator to determine the static IP

addressingsettingstobeexplicitlyassignedtothe

pod.TheBitporterpodwillneedto

beconfiguredwiththesesettingsviatheUSBinterface(see“ConfiguringthePodto

UseaStatic IPAddress(‐isOption),”onpage 38) before itcanbeconnectedtothe

Ethernetnetwork.

•Ifconnectingthroughafirewall:theBitportercommunicatesonTCPport27000.

Optional:

thepodalsorespondstoUDPbroadcastsonport27001duringpodautode‐

tection, but this only works when the host and pod are within the same network

segment,whichisrarelythecasewhencommunicatingthroughafirewall.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 49 50

Komentáře k této Příručce

Žádné komentáře

Achronix Bitporter Uživatelský manuál Strana 22

Komentáře k této Příručce

Související produkty a manuály pro Počítačový hardware Achronix Bitporter